A.D.A.N. Chemicals

Application

Surface prepration

Surfaces are completely dry, and must be cleaned.Cement plaster, gypsum plaster, plywood, as may be imposed in any indoor surface that the "silk Plast '."Silk Plast" before applying stain surfaces against alkali or "prime coat’’ like should be protected with primer.The surface color of the wall due to smoke cigarettes or have turned yellow or brown stains, the "ceremonial coat like" apply primer before applying the material to dry for about 24 hours. Can set in war to prevent rusting in places where should be covered with oil-based paints

Direction for Material mixing

Silk Plast material are prepared in 1 kg bag

It requires only the addition of water

1 kg Silk Plast 5-7 litter you can add water

Silk Plast for mixing should be a pot

Put as stated in the pot by inserting silk Plast Mix well by hand to If the edema quantity hand mixer drill machine mix After shaking well for wet material to give the edge to 30-45 minute

Directions for Applying

Material is usually fitted with stainless steel trowel.

Mix with a thin layer of material has been placed on an equal surface The surface should be closely covered surface.

Standard covering an area of about 50-55square. Foot per bag.

Remark

To be used should be mixed together in one volume.

The material on the surface before any loose and flaking paint or plaster scrape.

Applied Materials within 48 hours and will soon be extraordinarily difficult on occasion, usually dry.

6 oC temperature down "silk Plast" Do not use.

DIRECTION FOR APPLY


BEG 1 Kg packing	TOOLS FOR APPLY	ADD WATTER	MIXING


APPLY